Instruction Manual

Page 127
AFL2-W15B-H61
Step 12: Replace the back cover and secure it using ten (10) previously removed
retention screws. Step 0:
7.5.2 WLAN Card Replacement
The AFL2-W15B-H61 has one WLAN card slot. To replace the WLAN card, follow the
instructions below.
Step 1: Follow all anti-static procedures. See Section
7.2.
Step 2: Turn off the power. See Section
7.3.
Step 3: Remove the back cover. See Section
7.4.1 above.
Step 4: Remove the internal aluminum back cover. See Section
7.4.2 above.
Step 5: Locate the WLAN card.
Step 6: Disconnect the main and auxiliary antennas on the WLAN module (
Figure 7-5).
Figure 7-5: Removing the Antennas
Step 7: Push the two spring clips in to release the WLAN card.