Instruction Manual

Page 103
AFL2-W15B-H61
5.7.1 Calibrating the Touch Screen
To calibrate the touch screen cursor with the motion of the touch screen pen (or finger),
please follow the steps below:
Step 1: Make sure the touch screen driver is properly installed.
Step 2: Locate the PenMount Monitor icon in the bottom right corner of the screen.
Figure 5-27: PenMount Monitor Icon
Step 3: Click the icon. A pop up menu appears. See
Figure 5-28.
Figure 5-28: PenMount Monitor Popup Menu
Step 4: Click Control Panel in the pop up menu shown in
Figure 5-28.
Step 5: The configuration screen in
Figure 5-29 appears.