Owner's manual

AFL2-W15A-N270/L325 Panel PC
Page 40
Figure 2-19: Tighten the Panel Mounting Clamp Screws
2.8.3 Stand Mounting
To mount the AFL2-W15A-N270/L325 using the stand mounting kit, please follow the
steps below.
Step 1: Locate the screw holes on the rear of the AFL2-W15A-N270/L325. This is where
the bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-W15A-N270/L325 insert the retention screws
into the screw holes and tighten them.