Owner's manual

AFL2-W15A-N270/L325 Panel PC
Page 94
Î UMA Buffer Size [Auto]
Use the UMA Buffer Size option to specify the memory to be reserved for the integrated
graphics. The following configuration options are available:
 Auto Default
 32 MB
 64 MB
 128 MB
 256 MB
 512 MB
Î Flat Panel Type
Use the Flat Panel Type to determine the LCD panel resolution. Configuration options are
listed below:
 Disable LVDS
 640x480 18Bit
 800x600 18Bit
 1024x768 18Bit
 1024x768 24Bit
 1280x1024 48Bit
 1920x1080 48Bit
 1920x1200 48Bit
 1366x768 24Bit
 1680x1050 48Bit
 by H/W D
EFAULT
Î Current Jumper Setting
Shows current value of the hardware jumper setting for the LVDS resolution. This is the
value used when "by H/W" is selected in the setting above.
3.7.4 Southbridge Configuration
Use the Southbridge Configuration menu (BIOS Menu 26) to configure the Southbridge
chipset.