User Manual

AFL2-W15A-N270 Panel PC
Page 60
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Power Exit
Configure Remote Access type and parameters
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Remote Access [Disabled]
 Select Screen
↑ ↓ Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 11: Remote Access Configuration
 Remote Access [Disabled]
Use the Remote Access option to enable or disable access to the remote functionalities
of the system.

Disabled DEFAULT
Remote access is disabled.

Enabled
Remote access configuration options shown below
appear:
Serial Port Number
Serial Port Mode
Redirection after BIOS POST
Terminal Type
These configuration options are discussed below.
 Serial Port Number [COM1]
Use the Serial Port Number option allows to select the serial port used for remote
access.

COM1 DEFAULT
System is remotely accessed through COM1

COM3
System is remotely accessed through COM3