User Manual

AFL2-W15A-N270 Panel PC

Page 47

3.3.2 IDE Configuration

Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration

of the IDE devices installed in the system.

BIOS SETUP UTILITY

Main Advanced PCIPNP Boot Security Chipset Power Exit

IDE Configuration

⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯

ATA/IDE Configuration [Compatible]

Legacy IDE Channels [SATA Pri, PATA Sec]

> Primary IDE Master : [Not Detected]

> Primary IDE Slave : [Not Detected]

> Secondary IDE Master : [Not Detected]

> Secondary IDE Slave : [Not Detected]

Options

Disabled

Compatible

Enhanced



Select Screen

↑ ↓ Select Item

Enter Go to SubScreen

F1 General Help

F10 Save and Exit

ESC Exit

BIOS Menu 4: IDE Configuration

 ATA/IDE Configurations [Compatible]

Use the ATA/IDE Configurations option to configure the ATA/IDE controller.



Disabled

Disables the on-board ATA/IDE controller.



Compatible DEFAULT

Configures the on-board ATA/IDE controller to be in

compatible mode. In this mode, a SATA channel will

replace one of the IDE channels. This mode supports

up to 4 storage devices.



Enhanced

Configures the on-board ATA/IDE controller to be in

Enhanced mode. In this mode, IDE channels and SATA

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.