User Manual

AFL2-W15A-N270 Panel PC
Page 38
Figure 2-28: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
2.9.3 USB Device Connection
To connect USB devices to the AFL2-W15A-N270, please follow the instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in
Figure 2-26.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See
Figure 2-29.
Figure 2-29: USB Device Connection