User Manual

AFL2-W15A-N270 Panel PC
Page 32
Figure 2-20: Tighten the Panel Mounting Clamp Screws
2.8.3 Stand Mounting
To mount the AFL2-W15A-N270 using the stand mounting kit, please follow the steps
below.
Step 1: Locate the screw holes on the rear of the AFL2-W15A-N270. This is where the
bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-W15A-N270 insert the retention screws into
the screw holes and tighten them.