User Manual

AFL2-W15A-N270 Panel PC
Page 29
Step 2: Once the mounting arm has been firmly attached to its surface, lift the
AFL2-W15A-N270 onto the interface pad of the mounting arm.
Step 3: Align the retention screw holes on the mounting arm interface with those in the
AFL2-W15A-N270. The AFL2-W15A-N270 arm mount retention screw holes are
shown in
Figure 2-17.
Figure 2-17: Arm Mount Retention Screw Holes
Step 4: Secure the AFL2-W15A-N270 to the interface pad by inserting four retention
screws through the mounting arm interface pad and into the AFL2-W15A-N270.