User Manual

AFL2-W15A-N270 Panel PC
Page 17
2.5 USB Dongle Installation
The installation for an USB dongle is described in this section.
Step 1: Remove the access panel and brackets as described in the HDD installation
instructions.
Step 2: Locate the USB dongle connector and install the USB dongle as shown below.
Figure 2-7: USB Dongle Installation
Step 3: Replace the bracket, access panel and screws.
2.6 Cover Removal
WARNING!
Turn off the power before removing the back cover. Risk of
electrocution. Severe damage to the product and injury to the body
may occur if internal parts are touched while the power is still on.