User Manual

AFL2-W15A-N270 Panel PC
Page 16
2.4 CompactFlash® Installation
The installation for a CompactFlash® card is described in this section.
Step 1: Remove the access panel and brackets as described in the HDD installation
instructions.
Step 2: Locate the CompactFlash® slot as shown in
Figure 2–5.
Figure 2–5: CompactFlash® Slot Location
Step 3: Install the CompactFlash® card into the slot (see
Figure 2–6).
Figure 2–6: CompactFlash® Install
Step 4: Replace the brackets, access panel and screws.Step 0: