User Manual

AFL2-W10A-N28 Panel PC
Page 71
Î
Force
BIOS
DEFAULT
Sets display mode to force BIOS.
Î
Keep
Current
Sets display mode to current.
Î UEFI Boot [Disabled]
Use the UEFI Boot BIOS option to enable or disable UEFI boot.
Î
Enabled
Enable UEFI boot if the 1
st
boot device is a GPT
HDD.
Î
Disabled DEFAULT
Disable UEFI boot.
4.7 Security
Use the Security menu (8BIOS Menu 22) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password must be 3 to 20 characters long.
Administrator Password
User Password
S
et Setup Administrator
Password
---------------------
ÅÆ : Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 18: Security
Î Administrator Password
Use the Administrator Passwo rd field to set or change an administrator password.