User Manual

AFL2-W10A-N28 Panel PC
Page 60
Î
IO=2F8h; IRQ=3
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3
4.3.6.1.2 Serial Port 2 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled
Disable the serial port
Î
Enabled DEFAULT
Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto DEFAULT
The serial port IO port address and interrupt
address are automatically detected.
Î
IO=2F8h; IRQ=3
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3
Î
IO=3F8h; IRQ=4
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ4
Î Device Mode [RS42 2/485]
Use the Device Mode option to select the serial port mode.
Î
RS422/485 DEFAULT
Enables serial port RS-422/485 support.
4.3.6.1.3 Serial Port 3 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.