User Manual

AFL2-W10A-N28 Panel PC
Page 41
Figure 3-27: DisplayPort Connection
Step 3: Insert the DisplayPort connec tor . Gently insert the DisplayPort connector. The
connector should engage with a gentle push. If the connector does not insert
easily, check again that the connector is a ligned correctly, and that the connector
is being inserted with the right way up.
3.12.3 LAN Connection
There is one external RJ-45 LAN connectors The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Locate the RJ-45 connector. The location of the LAN connector is shown in
Chapter 1.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with the
RJ-45 connectors on the AFL2-W10A-N28. See
8Figure 3-28.