User Manual

AFL2-W10A-N28 Panel PC
Page 36
3.11.5 Stand Mounting
To mount the AFL2-W10A-N28 using the stand mounting kit, please follow the steps
below.
Step 1: Locate the screw holes on the rear of the AFL2-W10A-N28. This is where the
bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-W10A-N28 insert the retention screws into
the screw holes and tighte n them.Step 0:
Figure 3-22: Stand Mounting (Stand-A/Bxx)
3.11.6 V-Stand Mounting
To mount the AFL2-W10A-N28 using the V-Stand mounting kit, please follow the steps
below.