User Manual

AFL2-W10A-N28 Panel PC
Page 27
 V-Stand mounting
The five mounting methods are described below.
3.11.1 Wall Mounting
To mount the flat bezel panel PC onto the wall, please follow the steps b elow.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four screw holes in the bra cket on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot hole s.
Step 5: Secure the mounting-bracket to the wall by insertin g the retention screws into
the four pilot holes and tightening them (
8Figure 3-12).
Figure 3-12: Wall-mounting Bra cket