User Manual

AFL2-W10A-N28 Panel PC
Page 26
Step 2: Press the reset button. Step 0:
3.9 Powering On the System
To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section
81.2.1.2.
Step 2: Hold down the Function and Brightness Up buttons fo r six seconds to power on
the system. Step 0:
3.10 Powering Off the System
To power off the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section
81.2.1.2.
Step 2: Hold down the Function and Brightness Up buttons fo r eight se conds to power
off the system. Step 0:
3.11 Mounting the System
WARNING:
When mounting the flat bezel panel PC onto an arm, onto the wall or
onto a panel, it is better to have more than one person to help with the
installation to make sure the panel PC does not fall down and get
damaged.
The five methods of mounting the AFL2-W10A-N28 are listed below.
 Wall mounting
 Panel mounting
 Rack mounting
 Arm mounting
 Stand mounting