User Manual

AFL2-W10A-N28 Panel PC
Page 25
broadcasting time for each panel PC can be set in dividually and controlled rem otely. Other
possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
3.7 Clear CMOS
If the AFL2-W10A-N28 fails to boot due to improper BIOS settings, the cle ar CMOS switch
clears the CMOS data and resets the system BIOS information. To do this, adjust the
clear CMOS switch to clear CMOS mode for a few seconds then adjust the clear CMOS
switch back to keep CMOS mode.
Step 1: Locate the clear CMOS switch on the bottom pan el (
8Figure 3-10).
Figure 3-10: Clear CMOS S witch Location
Step 2: Adjust the clear CMOS switch. Step 0:
3.8 Reset the System
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps bel ow.
Step 1: Locate the reset button on the bottom pa nel (
8Figure 3-11).
Figure 3-11: Reset Button Location