User Manual

AFL2-W10A-N28 Panel PC
Page 23
Step 3: Using two retention screws to install the RFID reader module in the location
shown in
8Figure 3-7.
Figure 3-7: RFID Reader Module Installation
Step 4: Connect the RFID module to the RFID conne ctor on the main board (
8Figure
3-8). The RFID connector pinouts are listed in Section
87.2.17.
Step 5: Place the RFID antenna on the location shown in
8Figure 3-8. Connect the RFID
antenna to the RFID antenna connector on the RFID module.
Figure 3-8: RFID Reader Connection