User Manual

AFL2-W10A-N28 Panel PC
Page 108
Step 3: Remove a tot al of eleven (11) retention screws from the back cover (9Figure 6-1).
Figure 6-1: Back Cover Retention Screws
Step 4: Carefully separate the back cover from the chassis and lift the cover clear of the
device Step 0:
6.4.2 Removing the Internal Cover
To remove the internal cover, follow the steps below.
Step 1: Remove the six (6) retention scre ws securing the internal cover to the chassis
(
9Figure 6-2).
Figure 6-2: Internal Cover Retention Screws