User guide

AFL2-17A/AB-H61
Page 59
the clear CMOS switch to clear CMOS mode for a few seconds then reinstall the clear
CMOS switch back to keep CMOS mode.
Step 1: Locate the clear CMOS switch on the bottom panel (Figure 5-14).
Figure 5-14: Clear CMOS Switch Location
Step 2: Adjust the clear CMOS switch. Step 0:
5.10 Reset the System
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps below.
Step 1: Locate the reset button on the bottom panel (Figure 5-15).
Figure 5-15: Reset Button Location
Step 2: Press the reset button. Step 0:
5.11 Powering On the System
To power on the system, follow the steps below:
Step 1: Locate the Function and Brightness Up function keys. See Section 1.2.1.1.