User guide

AFL2-17A/AB-H61
Page 55
Step 2: Connect the RFID connector of the RFID USB cable to the RFID connector on
the motherboard (RFID_USB1).
Step 3: Attach the sticker of the RFID module to the bottom of the panel.
Figure 5-8: Install the RFID module
Step 4: Secure the RFID module to the motherboard using two retention screws on
either side.
Step 5: Use the RFID reader to read a RFID card.
5.7 DVD-ROM Ins tallation (Optional)
To install a DVD-ROM, please follow the steps below.
Step 1: Remove four screws from the DVD-ROM cover (Figure 5-9).