User guide

AFL2-17A/AB-H61
Page 150
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Auto Power Button Status [OFF]
Restore AC Power Loss [Last State]
Power Saving Function [Disabled]
WIFI Function [Enabled]
DMIC Function [Enabled]
BT Function [Enabled]
RFID Function [Enabled]
Auto Dimming Support [Disabled]
Audio Configuration
Azalia HD Audio [Enabled]
Azalia internal HDMI codec [Enabled]
PCI Express Ports Configuration
PCIe LAN Controller [Enabled]
PCIe LAN PXE Boot [Disabled]
PCIe LAN Controller 2 [Enabled]
PCIe USB 3.0Controller [Enabled]
Specify what state to go
to when power is
re-applied after a power
failure (G3 state).
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+ - Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 18: Southbridge Chipset Configuration
 Restore AC Power Loss [Last State]
Use the Restore on AC Power Loss option to specify what state the system returns to if
there is a sudden loss of power to the system.

Power Off DEFAULT
The system remains turned off

Power On
The system turns on

Last State
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
 Power Saving Function [Disabled]
Use the Power Saving Function BIOS option to enable or reduce power consumption in
the S5 state. When enabled, the system can only be powered-up using the power button.

Disabled DEFAULT
Power saving function support disabled

Enabled
Power saving function support enabled