User guide

AFL2-17A/AB-H61
Page 135
8.3.5 S ATA Configuration
Use the SATA Configuration menu (BIOS Menu 8) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Configuration
SATA Mode [IDE Mode]
Serial-ATA Controller 0 [Compatible]
Serial-ATA Controller 1 [Enhanced]
SATA Port0 Optiarc CDRWDV ATAPI
SATA Port1 Not Present
Enable/Disable IDE Mode.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 8: IDE Configuration
 SATA Mode [IDE Mode]
Use the SATA Mode option to configure SATA devices as normal IDE devices.

Disable
Disables SATA devices.

IDE Mode DEFAULT
Configures SATA devices as normal IDE device.
 Serial-ATA Controller 0 [Compatible]
Use the Serial-ATA Controller 0 option to configure the Serial-ATA controller mode when
the SATA mode is set to IDE Mode.

Disable
Disables Serial-ATA controller.

Enhanced
Configures the Serial-ATA controller to be in enhanced
mode. In this mode, IDE channels and SATA channels
are separated. Some legacy OS do not support this
mode.