Manual

AFL2-17A/AB-H61
Page 130

Enabled DEFAULT
Enable the serial port
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto DEFAULT
The serial port IO port address and interrupt
address are automatically detected.

IO=2F8h; IRQ=3
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3

IO=3F8h; IRQ=3,
4,5,6,7,10,11,12
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12

IO=2F8h; IRQ=3,
4,5,6,7,10,11,12
Serial Port I/O port address is 2F8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12

IO=3E8h; IRQ=3,
4,5,6,7,10,11,12
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12

IO=2E8h; IRQ=3,
4,5,6,7,10,11,12
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ3, 4, 5, 6, 7, 10, 11, 12
8.3.8.1.3 Serial Port 3 Configuration
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled DEFAULT
Enable the serial port
 Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.