Owner's manual

AFL2-15A-H61
Page 25
3.6 RFID Reader Installation (Optional)
An optional RFID reader can be installed in the AFL2-15A-H61. To install the RFID reader,
follow the instructions below.
Step 1: Remove a total of ten (10) retention screws from the back cover (
Figure 3-7).
Figure 3-7: Back Cover Retention Screws
Step 2: Remove the six (6) retention screws securing the internal aluminum cover to the
chassis (
Figure 3-8).
Figure 3-8: Internal Cover Retention Screws