Owner manual

AFL2-12A-HM65 Series Panel PC
Page 57
Step 8: Grasp the WLAN card by the edges and carefully pull it out of the socket
(
6Figureٛ 5-6).
Figure
ٛ 5-6: Removing the WLAN card
Step 9: Install a new WLAN card by inserting the card into the slot at an angle
Step 10: Push the WLAN card down until the spring retainer clips lock into place.
Step 11: Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated
with a strip of black electrical tape. See
6Figureٛ 5-7.
NOTE:
To ensure the WLAN module functions correctly, please make sure the
WLAN antennas are attached in the proper configuration.