Owner manual

AFL2-12A-HM65 Series Panel PC
Page 38
Step 7: Once the flat bezel panel PC with the attached rack/cabinet bracket has been
properly inserted into the rack or cabinet, secure the front of the rack/cabinet
bracket to the front of the rack or cabinet (
6Figure 4-13).
4.8.4 Stand Mounting
To mount the AFL2-12A-HM65 using the stand mounting kit, please follow the steps
below.
Step 1: Locate the screw holes on the rear of the AFL2-12A-HM65. This is where the
bracket will be attached (
6Figure 4-14).
Figure 4-14: Mounting screw location
Step 2: Align the bracket with the screw holes.
Step 3: To secure the bracket to the AFL2-12A-HM65, insert the retention screws into
the screw holes and tighten them.