Manual

AFL2-12A-HM65 Series Panel PC
Page 67
Figure
ٛ 5-2: Internal Cover Retention Screws
Step 2: Lift the aluminum cover off the AFL2-12A-HM65. Step 0:
5.5 Replacing Components
5.5.1 Memory Module Replacement
The flat bezel panel PC is preinstalled with a 1.0 GB DDR3 memory module. If the
memory module fails, follow the instructions below to replace the memory module.
Step 1: Follow all anti-static procedures. See Section 5.2.
Step 2: T
urn off the power. See Section 5.3.
Step 3: Remove the
back cover. See Section 5.4.1 above.
Step 4: Remove the i
nternal aluminum back cover. See Section 5.4.2 abo
ve.
Step 5: Locate the DDR3 SO-DIMM on the motherboard.
Step 6: Remove the DDR3 memory module by pulling both the spring retainer clips
outward from the socket.
Step 7: Grasp the DDR3 memory module by the edges and carefully pull it out of the
socket.