Manual

AFL2-12A-HM65 Series Panel PC
Page 126
Step 9: The calibration screen in is shown. See Figure 7-26.
Figure 7-26: Calibration Screen
Step 10: Follow the instructions. The user is asked touch the screen at five specified
points after which the screen is calibrated. Step 0:
7.7 AMCap Driver Installation
To install the AMCap driver, please do the following.
Step 1: Access the driver list. (See Section 7.2)
Step 2: Click “AM
Cap” and select the folder which corresponds to your operating
system.
Step 3: Double click the setup file.
Step 4: The Welcome Screen in Figure 7-27 ap
pears.
Step 5: Click Next to continue.