Instruction Manual

AFL2-08A-N26
Page 76
 Hyper-Threading [Enabled]
Use the Hyper-Threading option to enable or disable the CPU hyper threading function.

Disabled
Disables the use of hyper threading
technology

Enabled DEFAULT
Enables the use of hyper threading
technology
7.3.4 S ATA Configuration
Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the
configuration of the SATA devices installed in the system.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
SATA Port0 Not Present
SATA Port1 Not Present
Configure SATA as [IDE]
Select a configuration
for SATA Controller.
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
+/-: Change Opt.
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save & Exit
ESC Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 6: IDE Configuration
 Configure S ATA as [IDE]
Use the Configure SATA as option to configure SATA devices as AHCI devices.

IDE DEFAULT
Configures SATA devices as normal IDE device.

AHCI
Configures SATA devices as AHCI device.