Instruction Manual

AFL2-08A-N26
Page 28
4.6.2 ATX Power Mode
With the ATX mode selected, the AFL2-08A-N26 panel PC goes in a standby mode when
it is turned off. The panel PC can be easily turned on via network or a power switch in
standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
 Security surveillance
 Point-of-Sale (POS)
 Advertising terminal
4.7 Clear CMOS
If the AFL2-08A-N26 fails to boot due to improper BIOS settings, the clear CMOS switch
clears the CMOS data and resets the system BIOS information. To do this, adjust the
clear CMOS switch to clear CMOS mode for a few seconds then reinstall the clear CMOS
switch back to keep CMOS mode.
Step 1: Locate the clear CMOS switch on the bottom panel (Figure 4-7).
Figure 4-7: Clear CMOS Switch Location
Step 2: Adjust the clear CMOS switch. Step 0:
4.8 Reset the System
The reset button enables user to reboot the system when the system is turned on. To
reboot the system, follow the steps below.
Step 1: Locate the reset button on the bottom panel (Figure 4-8).