Instruction Manual

AFL2-08A-N26
Page 107
8.5.1 Calibrating the Touch Screen
To calibrate the touch screen cursor with the motion of the touch screen pen (or finger),
please follow the steps below:
Step 1: Make sure the touch screen driver is properly installed.
Step 2: Locate the PenMount Monitor icon in the bottom right corner of the screen.
Figure 8-17: PenMount Monitor Icon
Step 3: Click the icon. A pop up menu appears. See Figure 8-18.
Figure 8-18: PenMount Monitor Popup Menu
Step 4: Click Control Panel in the pop up menu shown in Figure 8-18.
Step 5: The configuration screen in Figure 8-19 appears.