Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page VI
Packing List
NOTE:
If any of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the AFOLUX AFL-xxA-N270 series from or
contact an IEI sales representative directly. To contact an IEI sales
representative, please send an email to
sales@iei.com.tw.
The items listed below should all be included in the AFOLUX AFL-xxA-N270 series
package.
1 x AFOLUX AFL-xxA-N270 series flat panel PC
1 x Power adapter
1 x Power cord
1 x Screw kit
1 x SATA and power cable
1 x User manual CD and driver CD
1 x Touch pen
Images of the above items are shown in Chapter 3 on page
25.