Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 21
2.8 Wireless Connections
The following section describes the wireless modules on the circuit.
2.8.1 USB Bluetooth Module
An integrated Bluetooth module is connected to ICH7 chipset through the USB bus. The
AFL-xxA-N270 Bluetooth module enables wireless communications between the
AFL-xxA-N270 and various peripheral devices through a Bluetooth network. The
peripheral devices may include:
Headsets
Barcode readers
PDA
Printers
Cell phones
Keyboard and mouse
The technical specifications of the Bluetooth module are listed in the Appendix.
2.8.2 Wireless Ethernet
An integrate PIFA antenna on the AFOLUX AFL-xxA-N270 ensures an uninterrupted
wireless connection. PIFA antennas can receive high-quality, uniform signals in any
location from all directions without any signal degradation or impedance and are the most
efficient antennas on the market.