Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 8
Operation Temperature -10ºC ~ 50ºC with CF card -10ºC ~ 50ºC with
CF card
0ºC ~ 40ºC with
HDD
Storage Temperature -20ºC ~ 60ºC
Net weight 0.6 kg 0.8 kg 1.4 kg 1.8 kg
IP level (front panel) IP 64
EMC CE, FCC and CCC
Safety CB
Touch Screen Resistive Type 4-wire
(touch controller is on board)
Resistive Type 5-wire
(touch controller is on board)
36 W 48 W
Input: 90 VAC ~ 264 VAC @ 50 Hz / 60 Hz
Power Adapter
Output: 12 V DC
Power Consumption 23 W 25 W 28 W 32 W
1 x 12 V DC input jack
1 x Audio connector
1 x RS-232 COM port connectors
1 x RS-232/422/485 COM port connector
2 x RJ-45 for LAN
2 x USB 2.0 ports
1 x Power switch
I/O Ports and Switches
1 x Reset button
Table 1-2: AFL-xxA-N270 Series System Specifications