Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 3
802.11 b/g wireless module
Two USB 2.0 ports
Watchdog timer that triggers a system reset if the system hangs for some
reason
IP 64 compliant front panel
AT or ATX power mode
Touch screen
Bluetooth
RoHS compliance
There are four kinds of panel size of the AFL-xxA-N270 series. The model numbers and
model variations are listed below.
Model Size Brightness Resolution
AFL-07A-N270/WT-R/1GB
7” 350 cd/m
2
WVGA (800 x 480)
AFL-08AH-N270/WT-R/1GB
8.4” 450 cd/m
2
SVGA (800 x 600)
AFL-10A-N270/WT-R/1GB
10.4” 400 cd/m
2
SVGA (800 x 600)
AFL-12A-N270/WT-R/1GB
12.1” 400 cd/m
2
XGA (1024 x 768)
Table 1-1: Model Variations
1.1.2 Applications
The AFL-xxA-N270 panel PCs are elegant yet sophisticated systems that are easily
implemented in commercial environments, industrial environments and corporate
environments.
1.2 External Overview
1.2.1 General Description
The stylish AFL-xxA-N270 panel PC comprises of a screen, rear panel, top panel, bottom
panel and two side panels (left and right). An ABS/PC plastic front frame surrounds the
front screen. The rear panel provides screw holes for a wall-mounting bracket compliant
with VESA FDMI standard. An I/O interface panel on the bottom panel of the