Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 135
A.4 Touch Screen Specifications
The AFL-xxA-N270 series comes with an analog resistive type touch panel. The touch
panel specifications are listed below.
SPECIFICATION AFL-07A-N270 AFL-08AH-N270 AFL-10A-N270 AFL-12A-N270
Model PANJIT 1070404C PANJIT 1084403B PANJIT 1104502A PANJIT 1121505B
Type Analog Resistive Type Touch Panel
Wire Type 4-wire 4-wire 5-wire 5-wire
Viewing Area (mm) 154.90 x 93.94 130.75 x 173.38 219.8 x 166.8 188.0 x 250.0
Active Area (mm) 152.40 x 91.44 127.78 x 170.38 212.1 x 159.3 185.0 x 246.0
Total Transmission 78%
Maximum Voltage DC7V
Connector Type FPC.
Operating Temperature -10°C ~ 60°C -10°C ~ 40°C -10°C ~ 50°C
Operating Humidity 20% ~ 90% RH
Storage Temperature -20°C ~ 70°C
Storage Humidity 20% ~ 90% RH
Dimensions 165 x 104 x 1.4 145.5 x 188 x 2.1 238.8x 188.7 x 2.6 204 x 268 x 2.1