Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 133
A.1 Motherboard Specifications
The system comes with an IEI AFLMB-945GSE motherboard. The detailed specifications
for the motherboard are listed below.
Specification AFLMB-945GSE
Northbridge Intel® 945GSE
Southbridge Intel® ICH7
Processor 1.6 GHz Intel® Atom™ N270 processor
FSB Speed 533 MHz
Supported Memory One 200-pin 2.0 GB (max.) 533 MHz or 400 MHz DDR2 SDRAM SO-DIMM
(system max. 2.0 GB)
System BIOS AMI BIOS
Hard disk drives Two SATA drives
VGA Integrated in the Intel® 945GSE
LAN Realtek RTL8111CP PCIe GbE Controllers
Expansion Options One PCIe Mini
Super I/O ITE IT8718F
Audio Codec RealTek ALC655
Audio Amplifier NXP TDA1517P
USB Two external USB 2.0 ports
Two internal pin headers
RS-232 Fintek
FAN connector One 4-pin CPU fan connector
Extra-Module Bluetooth Module (USB protocol BT-330C-V2)
A.2 Processor Specifications
The N270 Intel® Atom™ processor specifications are given below.
Parameter Specifications
CPU Speed 1.6 GHz
Bus Speed 533 MHz
L2 Cache Size 512 KB
L2 Cache Speed 1.6 GHz