Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 118
Figure 7-18: AC’97 Driver Installation
Step 10: When the driver is installed, the driver installation finish screen in
Figure 7-19
appears.
Step 11: Select “Yes, I wish to restart my computer now” And click Finish
Figure 7-19: AC’97 Driver Installation Complete
Step 12: The system reboots.Step 0:
7.6 LAN Driver Installation
To install the LAN driver, please do the following.
Step 1: Access the driver list shown in
Figure 7-1. (See Section 7.2)