Owner's manual
Table Of Contents
- 42AFL-xxA-N270 Series Flat Panel PC
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Installation
- 4.1 Anti-static Precautions
- 4.2 Installation Precautions
- 4.3 Preinstalled Components
- 4.4 Installation and Configuration Steps
- 4.5 Removing the Back Cover
- 4.6 CF Card Installation
- 4.7 HDD Installation (AF-12A-N270 Only)
- 4.8 AT/ATX Mode Selection
- 4.9 Jumper Settings
- 4.10 Mounting the System
- 4.11 Bottom Panel Connectors
- 5 System Maintenance
- 6 AMI BIOS Setup
- 7 Software Drivers
- A System Specifications
- B Safety Precautions
- C BIOS Configuration Options
- D Watchdog Timer
- E Hazardous Materials Disclosure
- F Index
AFL-xxA-N270 Series Panel PC
Page 100
Sec. Display Device [CRT]
Use the Sec. Display Device option to select the second display device used by the
system. Configuration options are listed below.
Disabled
CRT D
EFAULT
LFP Panel Type [by H/W]
Use the LFP Panel Type option to select the type of flat panel connected to the system.
Configuration options are listed below.
640x480 18b
800x480 18b
800x600 18b
1024x768 18b
1280x1024 36b
1400x1050 36b
1440x900 36b
1600x1200 36b
by H/W D
EFAULT
6.7.2 SouthBridge Configuration
The SouthBridge Configuration menu (6BIOS Menu 19) the southbridge chipset to be
configured.