Owner's manual

AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 32
2.6.4 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Figure 2-20: Wall Mount
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four brackets screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 2-21).