Instruction Manual

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 23
Figure 2-8: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 port. Step 0:
2.7.2 Serial Device Connection
The serial device connectors are for connecting serial devices to the
AFL-W19A/W19B/17D/W15A-GM45. Follow the steps below to connect a serial device to
the AFL-W19A/W19B/17D/W15A-GM45 panel PC.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
5Figure 2-7.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See
5Figure 2-9.