User Manual

AFL-W19A/W19B/17D/W15A-GM45 Panel PC
Page 24
Figure 2-9: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
2.7.3 USB Device Connection
To connect USB devices to the AFL-W19A/W19B/17D/W15A-GM45, please follow the
instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in
Figure 2-7.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See
Figure 2-10.