Instruction Manual

AFL-W19A/17D/W15A-N270 Panel PC
Page 30
Figure 2-19: Arm Mounting Retention Screw Holes
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the flat panel PC.
Step 0:
2.6.4 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Figure 2-20: Wall Mount
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four brackets screw holes on the wall.