Instruction Manual

AFL-W19A/17D/W15A-N270 Panel PC
Page 27
Step 1: Slide the rear of the AFL-W19A/17D/W15A-N270 flat panel PC through the
rack/cabinet bracket until the aluminum frame is flush against the front of the
bracket (
Figure 2-15).
Figure 2-15: The Rack/Cabinet Bracket
Step 2: Insert the rack mounting clamps into the pre-formed holes along the edges of
the flat panel PC, behind the ABS/PC plastic frame.
Step 3: Tighten the screws that pass through the rack mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the bracket
(
Figure 2-16).
Figure 2-16: Secure the Rack/Cabinet Bracket