Instruction Manual

AFL-W10A-N270 User Manual
Page 30
2.4 AT/ATX Mode Selection
AT and ATX power modes can both be used on the AFL-W10A-N270. The selection is
made through an AT/ATX switch on the top edge of the inner aluminum cover (Figure 2-4).
To select AT mode or ATX mode, follow the steps below.
Step 1: Locate the AT/ATX switch on the top edge of the aluminum cover (Figure 2-4).
Figure 2-4: AT/ATX Switch Location
Step 2: Adjust the AT/ATX switch. Step 0: