Instruction Manual

AFL-W10A-N270 User Manual
Page 24
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 1: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 2: Open the outside box.
Step 3: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 4: Open the inside box.
Step 5: Lift the monitor out of the boxes.
Step 6: Remove the peripheral parts box from the main box. Step 0:
2.1.1 Packing List
The AFL-W10A-N270 panel PC is shipped with the following components:
Quantity Item Image
1 AFL-W10A-N270
1 Power adapter
P/N: 63000-FSP0401ADF03A822-RS