Instruction Manual

AFL-W10A-N270 User Manual

Page 124

Step 10: Eject the One Key Recovery CD and restart the system.

Step 11: Press the <DELETE> key as soon as the system is turned on to enter the BIOS.

Step 12: Enable the Auto Recovery Function option (Advanced  iEi Feature  Auto

Recovery Function).

BIOS SETUP UTILITY

Main Advanced PCIPNP Boot Security Chipset Exit

iEi Feature



Auto Recovery Function [Enabled]

Recover from PXE [Disabled]



Select Screen

  Select Item

Enter Go to SubScreen

F1 General Help

F10 Save and Exit

ESC Exit

BIOS Menu 21: IEI Feature

Step 13: Save changes and restart the system. If the system encounters a Blue Screen of

Death (BSoD) or a hang for around 10 minutes, it will automatically restore from

the factory default image. Step 0:

B.4 Setup Procedure for Linux

The initial setup procedure for Linux system is mostly the same with the procedure for

Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.

Step 1: Hardware and BIOS setup. Refer to Section B.2.1.

Step 2: Inst

all Linux operating system. Make sure to install GRUB (v0.97 or earlier)

MBR type and Ext3 partition type. Leave enough space on the hard drive to

create the recover partition later.