Owner's manual

AFL-F08A-N270 Panel PC
Page 36
Figure 3-22: Serial Device Connector
Step 3: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Step 0:
3.9.2.1 COM1 Pinouts
The pinouts for COM1 are listed in the table below.
Pin Description
1 NDCD1
2 NRX1
3 NTX1
4 NDTR1
5 GND
6 NDSR1
7 NRTS1
8 NCTS1
9 COM_RI1
10 GND
Table 3-11: COM1 Connector Pinouts